|
There are currently no product reviews.
 ;
manual de usuario perfecto y completo de buena calidad de impresion y muy detallado ideal !
 ;
It`s full copy of a service manual from url http://www.philips.owner-manuals.com/PM3216-service-manual-PHILIPS.html
;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
OPERATION
Move the Master Power switch (marked �Power� ¡) to the ��� (On) position. The HKTS 5 subwoofer will automatically turn itself on or go into Standby mode, depending on whether or not a signal is being sent to the HKTS 5 by your receiver or surround processor, and provided that the Auto/On switch � is moved to the left so that it is in the �Auto� position. When your receiver or amplifier is off, or is not sending program material to the subwoofer, the subwoofer will be in Standby mode and the LED ¢ on the amp panel will turn red. When the subwoofer senses an audio signal, it will automatically turn itself on and the LED ¢ will turn green. If the subwoofer does not sense a signal after approximately twenty minutes, it will automatically go into Standby mode.
� £
When the Auto/On switch � is switched to the �On� position, the subwoofer will remain on, whether or not program material is playing. If you will be away from home for an extended period of time, or if the subwoofer will not be used, switch the Master Power switch ¡ to the �Off� position.
¢
¡
Volume
Volume can be adjusted using the Subwoofer Level Control £, as shown below.
Subwoofer Level
Subwoofer Level
MIN
MAX
MIN
MAX
9
|
